Install Remote Control Battery; Turn On; Set Date And Time - Philips CID2680/93 User Manual

5
Reconnect the negative terminal of the
car battery.

Install remote control battery

Caution
•
Risk of explosion! Keep batteries away from
heat, sunshine or fire. Never discard batteries
in fire.
Note
• Remove batteries if they are exhausted or if
the remote control is not to be used for a long
time.
• Batteries contain chemical substances, they
should be disposed of properly.
•
Perchlorate Material - special handling may
apply. See www.dtsc.ca.gov/hazardouswaste/
perchlorate.
1
Open the battery compartment.
2
Insert one CR2025 battery with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Turn on

Caution
•
Risk of road accidents! Never watch video or
adjust settings while you drive.
1
Press to turn on the unit.
»
The available OSD (On-Screen
Display) languages are displayed.
2
Touch a language to select.
»
The OSD language is changed to the
selected language immediately.
• To adjust screen brightness/contrast,
press / on the remote control, then
press , , or .
• To turn off the unit, press
seconds.

Set date and time

1
Touch the upper left corner to display
main menu.
2
Touch in the middle right side of the
screen.
»
The second main menu is displayed.
for 3
EN 13