Table of Contents
Advertisement
7
Black wire
8
Blue cable
9
Red cable
10 White cable
11
Yellow cable
12 Yellow cable
13
Yellow cable
14 Yellow cable
15 Purple wire
16 Gearbox switch
17 Reverse gear
signal
Connect radio antenna
Connect the radio antenna to the radio
antenna of the system for better radio signal.
1
Connect the radio antenna to the car
antenna.
Connect external navigation box
This unit supports GPS navigation by
connecting Philips CEA100 external GPS
navigation box.
14
EN
Front line out Left/
Right
Subwoofer
Aux Right
Aux Left
Video in
Camera in
Video out 1
Video out 2
Reverse camera (B+)
Back lamp lead +
Note
•
Please consult your Phillips dealer or
distributer to purchase the CEA100 external
navigation box.
Mount in the dashboard
Note
•
Check wire connection before you mount the
unit into a car.
•
If preset radio stations are lost when the
ignition key is turned OFF and then back ON,
reconnect the red leads crosswise to the
yellow ones.
1
If the car does not have an on-board
drive or navigation computer, disconnect
the negative terminal of the car battery.
•
If you disconnect the car battery in
a car that has an on-board drive or
navigation computer, the computer
may lost its memory.
•
If the car battery is not disconnected,
to avoid short-circuit, ensure that
bare wires do not touch each other.
2
Ensure that car dashboard opening is
within these measurements:
Hide quick links:
Advertisement
Table of Contents
