Advertisement
5.
Remove the 2 nuts, washers, and bolts securing
the power center bracket to the rear of the
machine and remove it
Figure 5
1. Power center bracket
2. Nut
6.
Remove the battery and the battery platform
from the machine
7.
Remove the bolts and washers securing the
battery to the platform; dispose of or recycle
the battery in accordance with local, state, and
federal regulations
Figure 6
1. Battery pack
2. Battery platform
(Figure
5).
3. Washer
4. Bolt
(Figure
6).
(Figure
6).
3. Bolt and washer
3
Installing the Battery to the
Battery Platform
Parts needed for this procedure:
1
Battery pack
4
Bolt (1/4 x 4-1/2 inches)
4
Washer (1/4 inch)
4
Nut (1/4 inch)
2
Lock washer (M8)
2
Hex nut (M8)
g272519
Procedure
WARNING
The battery pack is shipped with a slight
charge and is capable of shocking you.
• Do not touch or allow tools to touch both
the positive and negative terminals of the
battery at the same time.
• Use insulated tools when installing the
battery.
1.
Remove the new battery pack from its carton.
Important:
material; if you ever need to ship the battery
for maintenance, warranty, or recycling, this
special packaging is required.
g272520
4
Save the carton and all packing
Advertisement
