Siemens 1000 CA Operating Instructions Manual page 43

7 REPLACING THE PAPER ROLL
If a colored stripe appears on the edge of the paper,
the paper roll must be replaced before the next message
is sent or received
Open the top cover
Swing the paper deflec
tion frame to the front
2. Move paper pressure lever
backwards
Remove the old paper roll
and pull the rest of the
paper backwards and out
Pull paper roll axle out
of the old roll
For mobile use only:
Unlatch paper roll axle
on both sides
Push the paper roll axle
into the new paper roll
until it makes contact
with the wire clip
The paper must unwind as
shown in the picture
The wire clip always rests
in the outermost groove
Load the new paper roll
into the holder
(Latch up the paper roll
when the teleprinter is
in mobile use)
Ring-shaped collar must
always rest in the groove
o f t h e l e f t - h a n d r o l l
holder
Zust.: 3
7-1 A22713-A1000-Y1-*-7619