Install/Replace The Battery Of Remote Control - Philips DCD7010/12 User Manual

Connect power
Note
•
Where the MAINS plug or an appliance coupler
is used as the disconnect device, the disconnect
device shall remain readily operable.
•
Risk of product damage! Make sure that the
power supply voltage corresponds to the
voltage printed on the back of the MAIN plug.
•
Before you connect the AC power cord, make
sure that you have complete all other connections.
•
Protect the power cord from being walked on
or pinched, particularly at plugs, convenience
receptacles, and the points where they exit
from the apparatus.
•
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Install/replace the battery of
remote control
a Push to open the battery compartment cover.
b Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
c Close the cover.
12 EN
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
• Do not mix batteries (old and new or carbon
and alkaline, etc).
• Remove the battery if the remote control is
not to be used for an extended period of time.