Rexroth IndraDrive
DOK-INDRV*-ADDCOMP****-PR02-EN-P
1):
1):
Joint bar is part of accessories HAS01.
Fig. 9-11:
Sample mounting device / braking resistor
HLR01.1N-1K08-N05R0-A-007-NNNN
Note:
The standard braking resistors are intended to be mounted
above the drive controllers HCS03; otherwise, forced
convection (blower) with a volume stream of 200 m³/hour is to
be provided.
Braking Resistors HLR01.1
9-9