Table of Contents
Advertisement
8
en | Safety Instructions
Warning!
Risk of explosion of Lithium battery
The battery can explode if it is replaced incorrectly.
!
Replace only with the same type as recommended by the
manufacturer.
Dispose used batteries according to the battery manufacturer's
instructions.
Notice!
Risk of damage to equipment
Protect the hardware from electrostatic discharge by observing
ESD instructions before unpacking of touching connectors of
electronics.
Always switch off power of the AMC2 device before modifying
the installation.
Do not connect or disconnect plug connectors, data cables, or
screw connectors while power is on.
1.3
Unpacking
Check the packaging for visible damage. If anything has been
damaged during transport, please inform the transport agency.
Unpack the unit carefully. This is an electronic device that must
be handled with care to avoid damage. Do not attempt to put
the unit into operation if components are damaged.
If any parts are missing, inform your customer service
representative or a Bosch Security Systems salesperson. The
shipping carton is the safest transport container for the unit.
Store it and the other packaging material for future use. If the
unit has to be sent back, use the original packaging.
2013-08 | AMC2-4R4 |
Access Modular
Bosch Sicherheitssysteme GmbH
Controller
Advertisement
Table of Contents
