Table of Contents
Advertisement
Resetting the device to the factory settings via the device website
1.
Open the device website
2.
Select <<System>>
3.
Confirm the confirmation prompt.
The Start page is displayed as soon as the factory settings have been fully reset.
The device does not have to be restarted.
8.3
Updating firmware
Functional enhancements for ISE SMART CONNECT KNX Panasonic are available via a newer version
of the firmware. The current firmware and corresponding product manual are available on our website
at www.ise.de
So that you can use the new functions, it is necessary for the versions of the firmware being used and
the product database entry are compatible.
8.3.1 Updating the firmware via the device website
You can only import a firmware version that is newer than the current version on the device.
Previous versions cannot be imported.
There are two ways to update:
•
Online: Import firmware automatically online.
•
Offline: Import firmware offline. For devices without Internet connection in the installation environ-
ment.
No compatibility check
The system does not check whether the current configuration is compatible with the new firm-
ware. You must check yourself whether the firmware is compatible with the product database
entry.
►
See Compatibility between product database entry and firmware version, p. 36.
Import firmware automatically online
1.
Download the current firmware version from www.ise.de
2.
Open the device website.
3.
Select <<Update firmware>>
The system determines which firmware version is currently installed. If a new firmware version is
available for the device, it will be indicated to you.
4.
Select the <<Update firmware>> button.
ISE SMART CONNECT KNX Panasonic
© 2019 ise Individuelle Software und Elektronik GmbH
►
see Calling up the start screen, p. 21.
→
<<Factory reset>> in the menu bar.
→
in the <<System>> menu bar.
Commissioning and configuration
1-000C-000
S. 35 / 69
Advertisement
Table of Contents
