Set Monthly Adjust; Set Schedule As Grow In - Toro EVOLUTION Series User Manual

Use the monthly adjust function to allow EVOLUTION
for all zones assigned to the schedule. During the winter and spring months, it may be necessary to decrease watering. In the summer
months, it might be necessary to increase watering.
Step 1
– While in the ADVANCED/SCHEDULE DETAILS menu, use the Up
want to edit. Press SELECT
Step 2
– Use the Up
Step 3
– Use the Up
Down arrows to enter the percentage you want your watering duration to increase or decrease. Press SELECT
Repeat Step 3 for the remaining months as necessary.
MONTHLY ADJUST
JANUARY
FEBRUARY
MARCH
APRIL
MAY
As an example, a runtime of 10 minutes with an adjustment of +50% will increase the actual runtime to 15 minutes. Similarly,
an adjustment of -50% will decrease the runtime to 5 minutes.
Use the Grow In function to set the schedule to water continuously for an extended period of time.
Step 4
– Use the Up
START – Enter the start time of the cycle.
END – Enter the end time of the cycle.
RUNTIME – Enter the duration the cycle will run. Set runtime in hours and minutes (HH:MM).
DELAY – Enter the duration between each cycle. Set delay in hours and minutes (HH:MM).
END AFTER – Enter the number of days the cycle will repeat. Select from 1-90 days.
GROW IN
START
END
RUNTIME
DELAY
END AFTER
Note: Restricted days will not affect the Grow In schedule but an activated rain sensor will.
18
.
or Down arrows to navigate to MONTHLY ADJUST. Press SELECT
or Down arrows to select the month you want to edit. Press SELECT
-15%
---
---
---
---
or Down arrows to select the proper value. Press SELECT
07:00AM
05:00PM
00:05
00:20
10 DAYS
TM
to automatically increase or decrease your watering with respect to the seasons
or Down arrows to select the Schedule you
.
. Use the Up
to save.
or
to save.