Start Button; Pause / Resume Button; Stop Button - Toro DEC-RS-1000-DR Installation And User Manual

If the gateway has an active running program, the display will read:
Sun 04/02/06
GW# 001-001
Running 04 prg+ Man
P01 Sta01 %00:05:00
P01 Sta02 00:05:00
P01 Sta03D 00:05:00
P02 Sta10P 00:05:00
Man Sta21 00:10:00
Man Sta22S 00:10:00

Start Button

Use the Start button to execute a manual function.
Pressing the Start button while the controller is idle will prompt the Manual Watering menu.
Multi-Manual Start Display
Multi-Manual
Starting
03
STOP to cancel
Press the Stop button to cancel.
Pause Button
The Pause button can be used to cancel a currently running station. Those stations will not be resumed.

Stop Button

Use the Stop function to cancel program or manual irrigation. If the Remote Gateway has no current activity, pressing
the Stop button will have no effect. The Stop function causes a system cancel including power-down / power-up sequence
for BOTH daughter boards regardless of station activity.
02:31 pm
Sec: 57
(Running Multi-Manual)
(The "%" symbol before the runtime indicates that station 01 is percent adjusted.)
(P01 indicates Program 01 is currently active)
(The "D" symbol after the station number indicates that station 03 is disabled.)
(The "P" symbol after the station number indicates that program 02 is paused.)
("Man" indicates Manual Watering is currently active)
(The "S" symbol after the station number indicates that program 02 is stacked.)
19