DISPLAY
DISPLAY
TV Aspect
Display Mode
TV Aspect
DVD
4:3: Select when a standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
Display Mode
DVD
Display Mode setting works only when the TV Aspect
mode is set to "4:3".
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Panscan: Automatically displays the wide picture on the
entire screen and cuts off the portions that do not fit.
22
AUDIO
Each DVD disc has a variety of audio output options.
Set the receiver's AUDIO options according to the
16 : 9
type of audio system you use.
Widescreen
Move
Select
5.1 Speaker Setup
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog Multi-
Channel Output. (See "5.1 Speaker Setup", page 36.)
Dynamic Range Control (DRC)
With the DVD*
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
*1: Dolby Digital only
Vocal
Set Vocal to On only when a multi-channel karaoke
DVD is playing. The karaoke channels on the disc will
mix into normal stereo sound.
AUDIO
5.1 Speaker Setup
Select
DRC
On
Vocal
On
Move
DVD
DVD
1
format, you can hear a program's
DVD
Select