How To Check This Installation Procedure; Before Connection; Check Items When Turning Off The Main Power - Canon imagePASS-B2 Installation Procedure

Check Items when Turning OFF the Main Power

How to Check this Installation Procedure

When Using the Parts Included in the Package
A symbol is described on the illustration in the case of using the parts included in the package
of this product.
Packaged Item
Symbols in the Illustration
The frequently-performed operations are described with symbols in this procedure.
Screw Connector
Tighten Remove Connect
Claw
Insert Remove Push
Checking instruction
Check Visual Check Sound Check
Check Items when Turning OFF the Main Power
F-1-1
Harness
Disconnect Secure Free
Plug in Turn on
F-1-2

Before Connection

The IP addresses for communication between the host
machine and server are set automatically
1) Enter the Service Mode (level 1).
2) COPIER > OPTION > INT-FACE > IMGCONT> "3"
3) Exit the Service Mode
Securing space for installation
Secure a space to install this equipment as shown in the figure below. A space of 200mm or
more is required from the back of this equipment.
200mm or more
Check Items when Turning OFF the Main Power
Check that the main power switch is OFF.
1) Turn OFF the main power switch of the host machine.
2) Be sure that display in the Control Panel and the lamp of the main power supply are turned
off, then disconnect the power plug.
2
Equipment
Rear
Front
F-1-3
2