Connecting A Dvdplayer With Colorstream® (Component Video), A Vcr, Or A Satellite Receiver - Toshiba 19SL410U Owner's Manual

Connecting a DVDplayer with ColorStream® (component video), a VCR, or
a satellite receiver
TVbackpanel
...... _ _E°'_ _ _, J
antenna
Coaxial cable
=.,,,,...----o,.-., 000
videoorDVDplayer with
t/Standard A/V cables
You will need:
•Coaxial cables
• Standard A/V cables
- If you have a mono VCR, connect L/MONO
on the TV to your VCR's audio out terminal
using the white audio cable only.
• Standard audio cables
• Component video cables
- You can connect the component video
cables (plus audio cables) from the DVD
player or satellite receiver to the
ColorStream
HD terminals (Y, PB, and PR)
on the TV. The ColorStream HD terminals
can be used with Progressive (480p, 720p)
and Interlaced (480i, 1080i) scan systems. A
1080i signal will provide the best picture
performance (1080p is not supported).
- If your DVD player or satellite receiver does
not have component video, connect a
standard A/V cable to VIDEO on the back
panel If your DVD player has HDMI video,
see page 16.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStreamHB
video input source on the TV.*
To view satellite programs using the
component video connections:
Turn on the satellite receiver. Select the ColorStream
HDvideo input source on the TV.*
To _iew the VCR or _iew and record antenna
channels:
Turn ON the VCR. Tune the VCR to the channel you
want to watch. Select the Video video input source on
the TV.*
To record a TV program while watching a
DVD:
Turn ON the VCR. Tune the VCR to the channel to
record.
* To select the video input source, press _ on the
remote control ([_. page 21).
The unauthorizedrecording, use, distribution, or revision
of television programs,videotapes,DVDs,and other
materialsis prohibitedunder the CopyrightLawsof the
UnitedStates and other countries,and may subject you
to civil and criminal liability.
15