Auto Clock Set; Manual Clock Set - Toshiba D-VR3SU Owner's Manual

Auto Clock Set

This menu is used to set the current time. You need to set
the time to use timer recording.
1 With the unit in Stop mode, press the MENU button.
No Disc
œ❷¤
2
Using the buttons, move the selection bar to
"Setup" then press Enter to select.
œ❷¤
3
Select Clock Set using the buttons, then press
❿
the or ENTER button.
No Disc
26 - English
œ❷¤
4
Select Auto Clock Set using the buttons, then
❿
press the or ENTER button.
No Disc Clock Set

Auto Clock Set

Manual Clock Set

You must have the antenna connected to set the
Auto Clock. See page Antenna Connections
Note
The Clock will be automatically set when you turn
off the recorder.
Select the sub menu (Clock Data CH, Time Zone or
5
œ❷
Daylight Saving) using the buttons, then press
❿
the or ENTER button.
No Disc Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic
Clock Data CH
Select a channel that carries a time signal using the
œ❷¤ ❿¤
buttons then press the or ENTER button.
Select Auto to set the channel automatically.
No Disc Clock Data CH
Select channel : Auto
Time ZONE
œ❷¤
Select the time zone of your area using the but-
❿¤
tons then press the or ENTER button. Select
Automatic to set the time zone automatically.
No Disc Auto Clock Set
Clock Data CH : Automatic
Automatic
Time Zone : Automatic Atlantic
Daylight Saving : Automatic Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Daylight Saving
œ❷¤
Select the On, Off or Auto using the buttons then
❿¤
press the or the ENTER button.
Select Automatic to set the daylight saving automatically.
No Disc Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic
Automatic
Yes
No
If your clock is set to the wrong time zone or day-
light saving, you can adjust these settings without
Note
turning off the Auto Clock Set function.

Manual Clock Set

If Auto Setup fails to set the DVD Recorder-VCR' s internal
clock by locating a local TV station, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD Recorder-
VCR's internal clock must be set correctly.
Open "MENU"
1
Press the MENU button while the DVD or VCR is
in Stop or Play mode.
Select "Setup"
2
œ❷
Using the buttons, move the selection bar to
"Setup" then press ENTER to select.
3 Select "Clock Set"
œ❷
Use the buttons to highlight "Clock Set"
then press the ENTER button.
Select "Manual Clock Set"
4
Move the highlight to "Manual Clock Set", then
press the ENTER button.
• The Clock Set will change as shown.
English - 27