System Setup; On-Screen Menu Navigation; Plug & Auto Setup - Toshiba D-VR3SG Owner's Manual

System Setup

• On-Screen Menu Navigation . . . . . . . . .26

• Plug & Auto Setup . . . . . . . . . . . . . . . .27
• Setting the Date and Time . . . . . . . . . .28
• Presetting the Stations Automatically . .29
• Presetting the Stations Manually . . . . . .30
• Clearing a Preset Station . . . . . . . . . . . .31
• Changing the Preset Manual Setup Table 32
• Selecting the RF OUT Sound Mode
(B/G-D/K) . . . . . . . . . . . . . . . . . . . . . .33
• Setting the VCR Output Channel . . . . . .34
• Setting Up the Language Features . . . . .35
• Setting Up the Audio Options . . . . . . . .39
• Setting Up the Display(Video) Options . .40
• Setting Up the Parental Control . . . . . . .41
• VCR Setting . . . . . . . . . . . . . . . . . . . . .42
• Intelligent Picture Control(IPC) . . . . . . .44
• Selection the Colour Mode . . . . . . . . . .45
• Front Display . . . . . . . . . . . . . . . . . . . .46
• NICAM . . . . . . . . . . . . . . . . . . . . . . . .47
• AV1 Output . . . . . . . . . . . . . . . . . . . . .47
26 - English
On-Screen Menu
Navigation
The on-screen menus allow you to enable or disable
various functions on your DVD Recorder-VCR. Use the
following buttons to open and navigate through the on-
screen menus.
DVD-RAM(VR)
Install
Programme
MENU Button
1
Press this button on the remote control while the
DVD or VCR is in Stop or Play mode to open the
on-screen MAIN MENU.
Up/Down and Left/Right
2
Use these buttons to move the selection bar
to cycle through the menu options.
3 OK Button
Press this button on the remote control to con-
firm any new settings.
4 RETURN Button
Press this button on the remote control to return
to the last MENU screen displayed or to exit the
on-screen MENU all together.
Plug & Auto Setup
The DVD Recorder-VCR will automatically set itself up
when it is plugged into the mains for the first time.
TV stations will be stored in memory. The process takes
a few minutes. The DVD Recorder-VCR will then be
ready for use.
Connect the RF cable as indicated on page 18.
1
• Connecting Your DVD Recorder-VCR to the TV
using the RF Cable.
Plug the DVD Recorder-VCR into the mains.
2
• "Auto" in the front panel display flickers.
The Language Set menu us displayed.
3
• Using the buttons, move the selection bar
to select the desired language then press OK
button.
Language Set English
Français
Deutsch
Español
Italiano
Nederlands
Start the auto setup.
4
5
Select "Contry " using the buttons to
select your country.
Auto Setup
Country Selection
Others
MOVE OK EXIT
Refer to following abbreviation table when
selecting "Country"
A(Austria) NL(Netherlands) S(Sweden) PL(Poland)
B(Belgium) I(Italy) CH(Swiss) CZ(Czech)
DK(Denmark) N(Norway) TR(Turkey) Others
FIN(Finland) P(Portugal) GR(Greece)
D(Deutschland) E(Spain) HU(Hungary)
Start the auto scanning.
6
Check the date and time.
7
• if it is: Correct
Press OK button then the data and time
will be saved.
• if it is: Incorrect
Refer to "Seting the Date and Time"
menu, when you want to change the date
and time.
English - 27