Using The Sterilization Station (Sterilization And Charging) - LG VH9200DSW Owner's Manual

How to use

Using the Sterilization Station (Sterilization and Charging)

1
UV lamp status display
➊ The plug of sterilization
station must be plugged
into outlet to use the
sterilization station.
※ If you do not use the cleaner for a long time, turn off the switch to reduce battery discharge.
10
2
➋ When the product is correctly
placed on the sterilizer station,
a blue indicator lights on the
UV lamp status screen and the
UV lamp starts operation for
sterilization.
The indicator and the UV
lamp are turned off 5 minutes
after placing the product on
the sterilizer station, and
sterilization stops.
3
Battery fully charged
➌ 5 minutes later the UV lamp
and UV lamp status display
automatically turns off at the
same time.
Then, sterilization operation is
complete and the product will be
charge state.
You can check the battery level
through battery level indicator.
When charging is completed,
the battery level indicator will be
turned on completely.
5 minutes later the battery level
indicator will be turned off.
The switch must be turned on in
order to charge the product.