Start Playback - Toshiba SD-P1500 Owner's Manual

TOP MENU
MENU
SETUP
1
/ /
ENTER
5
STOP
SHIFT
5

Start playback.

PLAY Press PLAY.
PLAY
If you select a DVD video disc that contains a top
menu, or select a PBC (Playback Control)-
featured VIDEO CD (
See "Locating a title using the top menu".
• You may need to press the TOP MENU or MENU
button to display disc menu (depending on the
actual DVD video disc.)
To start playback in the stop mode.
Press PLAY.
PLAY
PLAY
Notes
• Do not put an unplayable disc or any objects other than discs
in the disc holder.
• Do not tilt, shake or move the main unit while playing. It may
damage the disc.
• In many instances, a menu screen will appear after playback
of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching
that image onto its screen. To avoid this, be sure to press the
STOP button once the movie is completed.
To obtain a higher quality picture
Occasionally, some picture noise not usually visible during a normal broadcast may
appear on the TV screen while playing a DVD video disc because the high
/
resolution pictures on these discs include a lot of information. While the amount of
noise depends on the TV you use with this player, you should generally reduce the
sharpness adjustment on your TV when viewing DVD video discs.
About
DVD VCD
The
DVD VCD CD
function described under each heading.
: You can use this function with DVD video discs.
DVD
: You can use this function with VIDEO CDs.
VCD
: You can use this function with audio CDs.
CD
), a menu may appear.
11
26
CD
icons on the heading bar show the playable discs relevant to the
Initial set-up
Make the following settings on the display.
On-Screen Language: Select the appropriate
on-screen language.
TV Shape: Select a picture size according to the aspect
ratio of your TV. When you use the LCD of this player,
select "16:9 Widescreen." (See
Audio Out Select: Select the output sound format
corresponding to your audio system connection. (See
for details.)
47
On-Screen Language ENG
TV Shape
Audio Out Select
1 Press / to select "On-Screen Language," and
press ENTER.
2 Select a language using
3 Press to select "TV Shape," and press ENTER.
4 Select a picture size using
5 Press to select "Audio Out Select," and press
ENTER.
6 Select an output sound using
ENTER.
7 Finally press SETUP. (If you use the remote control,
press SETUP while pressing SHIFT.)
All your selections are entered and the display
disappears.
To change your settings, see "Customizing the Function
Settings."
52
for details.)
46
Initial Setup
16:9
Bitstream
/ , and press ENTER.
/ , and press ENTER.
/ , and press
21