Download Print this page

Toshiba TLP848 Product Manual

Toshiba photointerrupter infrared led + phototransistor product manual

Advertisement

Quick Links

○ Camera Module for Mobile Phone
○ Digital Still Camera and Video Camera
○ Personal Equipment and Small-sized OA Equipment
The TLP848 is a surface-mount photointerrupter which is composed of a
GaAs infrared LED and a Si phototransistor.
It is an ultra compact package. Moreover it has a wider gap width than
1mm gap width of industry-standard and has a high resolution.
Ultra compact package : 2.8×1.9×2.5mm (typ.)
Surface-mount type
Lead(Pb)-Free
Gap width : 1.2mm (typ.)
High resolution : Slit width 0.3 mm (typ.)
High current transfer ratio : I
Material of the package : PPS (Polyphenylene sulfide)
Absolute Maximum Ratings
Characteristics
Forward current
Forward current derating (Ta>25°C)
Reverse voltage
Collector-emitter voltage
Emitter-collector voltage
Collector power dissipation
Collector power dissipation derating
Collector current
Operating temperature range
Storage temperature range
Soldering temperature
Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the
significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even
if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum
ratings.
Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook
("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test
report and estimated failure rate, etc).
Note 1: The reflow time and the example of temperature profile are shown in the section entitled Mounting Method.
Note 2: Weekly code: (Three digits)
TOSHIBA Photointerrupter Infrared LED + Phototransistor
TLP848
/I
= 3% (min)
C
F
(UL94V-0)
(Ta = 25°C
Symbol
I
F
ΔI
°C
F/
V
R
V
CEO
V
ECO
P
C
ΔP
°C
C/
(Ta>25℃)
I
C
T
opr
T
stg
(Note 1)
T
sol
Week of manufacture
(01 for first week of year, continues up to 52 or 53)
Year of manufacture
(One low-order digits of calendar year)
)
Marking (Note 2)
Rating
Unit
30
mA
−0.33
mA/°C
5
V
15
V
5
V
75
mW
−1
mW/°C
50
mA
−30 to 85
°C
−40 to 100
°C
250
°C
1
TLP848
TOSHIBA
11-3B1
Weight: 0.017 g (typ.)
Weekly Code
2007-10-01

Advertisement

loading

Summary of Contents for Toshiba TLP848

  • Page 1 ○ Digital Still Camera and Video Camera ○ Personal Equipment and Small-sized OA Equipment The TLP848 is a surface-mount photointerrupter which is composed of a GaAs infrared LED and a Si phototransistor. It is an ultra compact package. Moreover it has a wider gap width than 1mm gap width of industry-standard and has a high resolution.
  • Page 2 λ = 10 mA = 12 V, I λ ⎯ = 2 V TLP848 = 5 mA TLP848 (R) = 10 mA, I = 0.15 mA CE (sat) = 5 V, I = 1 mA = 1k Ω Typ. 1.10 1.23...
  • Page 3: Pin Connection

    Package Dimensions: TOSHIBA 11-3B1 Gate position Weight: 0.017 g (typ.) Pin Connection Center of sensor 1: Cathode 2: Anode 3: Collector 4: Emitter TLP848 Unit: mm Tolerance : ±0.1mm unless otherwise specified ( ): Reference value 2007-10-01...
  • Page 4 Baking condition: 60 ± 5°C, 12 to 24 h Storage period: 12 months from the seal date on the label 4. When the photointerrupter is baked, protect it from electrostatic discharge. 5. Do not toss or drop to avoid damaging the moisture-proof bag. TLP848 2007-10-01...
  • Page 5: Mounting Methods

    Do not perform wave soldering and manual soldering with a soldering iron. 2. Recommended soldering pattern 3. Cleaning When cleaning is required after soldering, Toshiba recommends the following cleaning solvents. It is confirmed that these solvents have no effect on semiconductor devices in our dipping test (under the recommended conditions).
  • Page 6 Packing Specification 1. Tape dimensions 4.0±0.1 + 0.1 φ1.5 − 0 φ1.1±0.1 Device direction 2.0±0.05 4.0±0.1 2.1±0.1 max 5° max 5° TLP848 Unit: mm 2007-10-01 0.3±0.05 2.7±0.1...
  • Page 7: Reel Dimensions

    (Note 1) φ180 +0 −4 φ13 ± 0.5 2 ± 0.5 100 mm or more (Note 2) Leading part: 400 mm or more TLP848 Unit: mm 11.4 ± 1 9 ± 0.3 Note1: Empty trailer section Note2: Empty leader section 2007-10-01...
  • Page 8 4. Packing format Packing quantity Reel Carton Packing form Each reel is sealed in an aluminum bag that contains a desiccant with a humidity indicator. 1,500 pcs 7,500 pcs TLP848 2007-10-01...
  • Page 9 Sample 2 Sample 1 0.01 Forward current I (mA) (typ.) Ta = 25°C Collector-emitter voltage V TLP848 – Ta Ambient temperature Ta (°C) – I Ta = 25°C V CE = 2V V CE = 0.4V Sample 2 Sample 1...
  • Page 10 I F = 5mA 0.001 0.0001 0.00001 (typ.) (typ.) 1000 Ta = 25°C V CC = 5V V OUT = 1V TLP848 ) – Ta (typ.) Ambient temperature Ta (°C) Switching characteristics (non saturated operation) (typ.) Load resistance R (kΩ) 2007-10-01...
  • Page 11 Ta = 25°C − Shutter Detection position d = 0 ± 0.2mm Shutter A’ Cross section between A and A' TLP848 Detection position characteristics (2) (typ.) I F = 5mA V CE = 2V Ta = 25°C Shutter Detection position +0.6...
  • Page 12 It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property.