Quick Start Parameters - Siemens MultiRanger 100 Quick Start Manual

Quick Start Parameters

Notes:
• P000 locks the unit, The unlocking value is 1954. All other values lock the unit.
• Defaults are shown with an *
P001 Operation: Sets the type of
measurement required for the application.
Standard Mode Dual Point Mode
Primary
Index
Global
0 Out-of-service
1 Material Level
2 Space
3 * Distance (transducer to material)
Values
4 DPD – dual point difference
5 DPA – dual point average
6 OCM – open channel flow rate
7 Pump Totalizer
P002: Material: Measures material type.
Liquid, may involve solids.
Standard Mode
Primary
Index
Global
1 * Liquid or horizontal solid surface
Values
2 Solid or angled surface
P003 Maximum Process Speed:
Determines level change reaction.
Primary
Transducer
Index
1 Slow (0.1 m/min)
Values
2 * Medium (1 m/min)
3 Fast (10 m/min)
P004 Transducer: Specifies transducer.
Primary Standard Mode Dual Point Mode
Index
Global
No transducer attached (preset for
0 *
Dual Point)
1 ST-25
2 ST-50
100 STH
101 XCT-8
Values
XPS-10 (preset for Standard
102 *
Mode)
103 XCT-12
104 XPS-15
112 XRS-5
250 mA input
Page EN-8
Transducer
Dual Point Mode
Transducer
Transducer
MultiRanger – QUICK START MANUAL
P005 Units: Specifies units used for
dimensional values.
Primary
Global
Index
1 * Meters
2 Centimeters
Values 3 Millimeters
4 Feet
5 Inches
P006 Empty: Distance in Units (P005) from
transducer face to process empty point.
Primary
Transducer
Index
Range: 0.000 to 9999
Values
Preset: 5.000m (or equivalent
depending on units)
Alters • P007 Span
Altered By •
P005 Units
P007 Span: Sets range levels to be
measured.
Primary
Level
Index
Range: 0.000 to 9999
Values
Preset: based on Empty (P006)
Note: Please refer to the Instruction
Manual to set up inputs, alarms and
controls, communications, and other
functionality.
7ML19985QD82