Advertisement
ingilizce-1.FH11 6/7/05 12:13 PM Page 12
Manual Tuning
By pressing the MENU and (
buttons of your remote control, you
will bring up the SET UP menu on
your television screen. Using the
down button (
control, highlight the Manual Tuning
bar in yellow and press "OK" or the
left/right motion ( /
Manual Tuning menu will appear on
the screen. Use the (
number buttons to manually tune your
desired program and press OK. The screen
will show the Manual Tuning menu. Choose
with the pressing of the right move button (
the program and systems you want to make
a search in between the Program number,
Color System and System lines.
Here your TV can be set to one system, you can
also select from more than one systems with the
(
) and (
) buttons. (option) access the Search
bar using the right button (
using the (
) and (
on the screen has the desired quality store it in
the memory pressing the OK button.
Repeat the same operation for the next program.
If you need to do Manual Fine Tuning on the
current channel or to name the current channel
refer to the related parts.
)
+
) on your remote
) button. The
–
+
) and (
) or
)
+
). Scan the channels
+
) buttons. If the program
ENGLISH -13-
If you already know the
Channel number
By pressing the MENU and (
of your remote control, you will bring
up the SET UP menu on your television
screen. Using the down button (
your remote control, highlight the Manual
Tuning bar in yellow and press "OK"
or (
) button. The Manual Tuning menu
+
will appear on the screen. Select the
desired program by using the (
(
) buttons and press the OK button.
The menu for the Manual Tuning will
be on screen. Access the System bar using the
right button (
). Here your TV can be set to one
+
system, you can also select from more than one
systems. (option) Select the Channel Band bar
pressing five times the right button (
Up (
) or down (
) direction buttons select S
for Cable channels and C for terrestrial programs
and press the right (
) button. Here you can
+
directly enter the channel number using the
numbering buttons on remote control, you can as
well scan the channels in the ascending or
descending order using the up (
direction buttons.
If the program found on screen is acceptable in
quality, then press the OK button to store it in the
memory and repeat the same operations for the
next channel.
If you need to do Manual Fine Tuning on the
current channel or to name the current channel
refer to the related sections.
To leave the "MENU" and menus to return to the
previous menu for any reason press the EXIT
button.
) buttons
+
) on
) and
). Using the
+
) or down (
)
Advertisement
