Fuel Gauge; Engine Oil Pressure Warning Light; Charge Indicator - Toro Reelmaster 5200-D Operator's Manual

4
5
6
Figure 24
1. Traction speed limiter
2. Reel control light
3. Speedometer
4. Brake pedals
Engine Coolant Temperature Warning
Light
The light (Fig. 25) illuminates and engine shuts down when
coolant reaches a dangerously high temperature.
Throttle Control
Move control (Fig. 25) forward to increase engine speed,
rearward to decrease speed.
4
2
1
7
8
9
Figure 25
1. Lower mow/raise control
lever

2. Fuel gauge

3. Engine coolant
temperature gauge
4. Engine oil pressure
warning light
3
1
2
7
5. Parking brake latch
6. Locking pin
7. Key switch
5 3
6
5. Engine coolant
temperature warning light
6. Glow plug indicator light

7. Charge indicator

8. Throttle control
9. Enable/disable switch
25
Fuel Gauge
The fuel gauge (Fig. 25) shows amount of fuel in tank.
Lower Mow/Raise Control Lever
The lever (Fig. 25) raises and lowers the cutting units and
also starts and stops the reels.
Glow Plug Indicator Light
When lit (Fig. 25), indicates a control system problem.
Light blinks when glow plugs are preheating.

Engine Oil Pressure Warning Light

This light (Fig. 25) indicates dangerously low engine oil
pressure.
Charge Indicator
The charge indicator (Fig. 25) illuminates when system
charging circuit malfunctions.
Enable/Disable Switch
The enable/disable switch (Fig. 25) is used in conjunction
with lower mow / raise control lever (Joystick) to operate
reels. Reels can be raised but not lowered when in mid
position.
Backlap Switch
The backlap switch (Fig. 26) is used in conjunction with
lower mow / raise control lever for backlapping operation.
Refer to Cutting Unit Maintenance, Backlapping.
1
Figure 26
1. Backlap switch