Installation And Connection - Whirlpool ACM220 Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

Any kitchen furniture next to the
appliance must be heat-resistant
(100 °C min.).
Important
The appliance must be secured
against overbalancing by using the
supplied chain on your oven.
Fasten hook (1) to the kitchen wall
(5) and connect safety chain (2) to
the hook.
1
Hook (is not supplied)
2
Safety chain (supplied and mounted
to oven)
3
Rear of cooker
4
Firmly fix chain to cooker rear
5
Kitchen wall

Installation and connection

Product can only be installed and
connected in accordance with the
statutory installation rules.
Important
Do not install the appliance next to
refrigerators or freezers. The heat
emitted by the appliance will lead to
an increased energy consumption
of cooling appliances.
Carry the product with at least two
persons.
Product must be placed directly on
the floor. It must not be placed onto
a base or a pedestal.
NOTICE
Material damage!
The door and/or handle must not be
used for lifting or moving the
appliance.
Electrical connection
Connect the product to a grounded
outlet/line protected by a fuse of
suitable capacity as stated in the
"Technical specifications" table. Have
the grounding installation made by a
qualified electrician while using the
product with or without a transformer.
Our company shall not be liable for any
damages that will arise due to using
the product without a grounding
installation in accordance with the local
regulations.
DANGER
Risk of electric shock, short
circuit or fire by unprofessional
installation!
The appliance may be connected
to the mains supply only by an
authorized qualified person and the
appliance is only guaranteed after
correct installation.
DANGER
Risk of electric shock, short
circuit or fire by damage of the
mains lead!
The mains lead must not be
clamped, bent or trapped or come
into contact with hot parts of the
appliance.
If the mains lead is damaged, it
must be replaced by a qualified
electrician.
The mains supply data must
correspond to the data specified on the
type label of the product. The rating
plate is either seen when the door or
11 | EN

Advertisement

Table of Contents
loading

Table of Contents