Making The Shield Connection - ABB Relion 670 Series Installation Manual

1MRK 514 026-UUS F
IEC04000167 V1 EN-US
Figure 30: Board with male connectors
IEC06000168 V3 EN-US
Figure 31:
PosNo Description
1
2
Table 10:
Connector type
Screw compression type
Terminal blocks suitable for ring lug terminals
6.1.6

Making the shield connection

When using shielded cables, always make sure that the shields are connected according to
applicable engineering methods.
670 series
Installation manual
2
Accessories
Ferrule
Bridge connector, used to jump terminal points in a connector.
Auxiliary power supply and binary I/O connectors
Because of limitations of space, when ring lug terminal is ordered for Binary I/O
connections, one blank slot is necessary between two adjacent I/O modules. Please
refer to the ordering particulars for details.
1
Rated voltage
250 V AC
300 V AC
Section 6
Connecting
M12583-1 v8
Maximum conductor area
2
2.5 mm (AWG14)
2
2 × 1 mm (2 x AWG18)
2
3 mm (AWG14)
M11998-3 v6
51