Advertisement
Unit Installation
1
Carefully unpack unit from its
packaging. Properly inspect for
defects before installing. Wear
work gloves to prevent dirt and
oil from being transferred to the
luminaire.
Electrical Connections
1
Remove electrical enclosure cover.
4
Replace electrical enclosure cover.
GE Lighting Solutions • www.gelightingsolutions.com
GE Lighting Solutions, LLC is a subsidiary of the General Electric Company. Lumination is a trademark of GE Lighting Solutions, LLC. The GE brand and logo are trademarks of the General Electric Company.
© 2013 GE Lighting Solutions, LLC. Information provided is subject to change without notice. All values are design or typical values when measured under laboratory conditions.
2
Install the unit into the reserved
hole in the ceiling.
Strain relief
Grommet
2
Remove knockout and insert
grommet. Unscrew the strain
relief.
3
Optional: Attach the supplied
L-shape safety brackets to the
back of the fixture. Hang the unit
through the holes of the bracket
with a cable.
3
Connect the AC line according to
the L-N-G label to the terminal
block through the strain relief.
Screw the strain relief tightly to fix
the cable.
905306
English
Advertisement
