Table of Contents
Advertisement
Troubleshooting
Symptom
Cause
POWER
No power
The power cord is not plugged in.
The battery is not remaining.
RADIO
No sound
The function switch is not set to
the Radio mode.
Some noise
There are electronic devices near
occurs.
the player.
CD
The unit does not
An unplayable disc is inserted.
start playback
The disc is placed upside down.
The disc is not placed within the
guide.
The disc is dirty.
TAPE
Unable to record
Record protect tabs are removed.
Notice (the date of the production of goods).
First figure ( of the left ) of series number means Year, next 2 figures
- Month of the production of this goods.
Designs and specifications are subject to change without notice.
Correction
General
Power supply
Power consumption
Net Weight
Plug in the power cord.
External dimensions (W x H x D)
Change the battery with a new
Output Power (T.H.D 10%)
one.
Speakers
Battery Operation
Set the switch to the Radio mode.
Tuner
FM
Set the player far from the
Tuning Range
devices.
Intermediate Frequency
Antenna
AM
Insert a playable disc.
Tuning Range
Intermediate Frequency
Place the disc with the playback
Antenna
side down.
CD
Place the disc on the disc tray
Frequency response
correctly inside the guide.
Signal-to-noise ratio
Clean the disc.
T.H.D
Cassette tape player
Recording System
Cover holes on back edge of tape
Frequency Response
with tap.
Signal to Noise Ratio
PORTABLE MP3/CD CASSETTE RECORDER ] OWNER'S MANUAL
Specifications
Refer to the back panel of the unit.
Refer to the back panel of the unit.
330 x 166 x 148 mm
DC 9V, six "C"(R14) batteries
65 - 108 MHz, 87.5 - 108.0 MHz
Telescopic antenna
522 - 1620 kHz or 520 - 1720 kHz
Ferrite bar antenna
4 Tracks 2 channel stereo
2.3 kg
1 W X 2
8Ω X 2
(not supplied)
10.7 MHz
455 kHz
100 - 18000 Hz
55 dB
0.5 %
125 - 8000 Hz
40 dB
7
Advertisement
Table of Contents
