Mains Filter Hfd - Bosch Rexroth IndraDrive HMV01.1E-W0030 Project Planning Manual

Rexroth IndraDrive

Mains Filter HFD

DOK-INDRV*-HMV-*******-PR01-EN-P
Risk of damage!
⇒ Only use Rexroth filters. These filters have been
adjusted to the Rexroth supply units, inverters and
motors in the best possible way. If you use different
CAUTION
filters, the limit values possibly cannot be complied with.
Moreover the filters and other components of the drive
system might be destroyed.
Types
There are 2 types of mains filter for IndraDrive M drive controllers to
ensure interference suppression according to EN61800-3, class A,
group 2 and 1 type to ensure interference suppression according to
EN61800-3, class B, group 1:
• Type 1:
For max. 6 axis with a total motor cable length of 240 m.
• Type 2:
For max. 15 axis with a total motor cable length of 900 m.
• Type 3:
For max. 6 axis with a total motor cable length of 100 m.
For IndraDrive C drive controllers you only need filters Type 1 or Type 3.
Features
• mains voltages which can be connected: 380V -15% to 480V +10%
• appropriate mains systems: TN, TT, IT
• maximum allowable ambient temperature: 40 °C (without derating)
resp. 55 °C (with 2% derating per °C to 40 °C)
• filters are UL listed
13-19
Appendix