Adjusting The Myride™ Suspension System - Toro TimeCutter 74726 Operator's Manual

For Models 74768 and 74778
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable
Figure 13
Adjusting the MyRide™
Suspension System
(Figure 13).
For Machines with the MyRide™
Suspension System
Note:
system easier, pivot the seat forward and install the
prop rod to take weight off the shock assemblies.
The MyRide™ suspension system adjusts to provide
a smooth and comfortable ride. You can adjust the
rear 2-shock assemblies to quickly and easily change
the suspension system. Position the suspension
system where you are most comfortable.
Adjusting the Rear-Shock
Assemblies
The slots for the rear-shock assemblies have detent
g027632
positions for reference.
The following graphic shows the position for a soft or
firm ride and the different detent positions
Note:
assemblies are always adjusted to the same positions.
Adjust the rear-shock assemblies
21
To make adjusting the MyRide™ suspension
Figure 14
1. Firmest position
2. Softest position
Ensure that the left and right rear-shock
(Figure 14).
g231347
3. Detents in the slots
(Figure 15).