Advertisement
KTS-250-16 Video Distribution Amplifier
Mode selector for
channels 15 and 16
Mode selector for
channels 13 and 14
Figure 5. Mode selector switches on the circuit board
I
NSTALLATION
WARNING:
Use power supplies marked Class 2 or LPS (limited power source). Using an incorrect power supply can cause electric
shock or fire.
1)
Mount the unit in a 19-inch (490-mm) rack.
2)
Connect the video input and output cables (see Figure 6).
Note: It is not necessary to use all of the unit's video inputs or outputs.
3)
Supply power to the unit (see Figure 6).
Video input cable
Power input
Figure 6. Cable connections
2
© 2003 Kalatel, a GE Interlogix company
Installation Instructions
Mode selector for
channels 11 and 12
Mode selector for
channels 9 and 10
Video output cables
1036614B / February 2003
Advertisement
