Motorola FX7400-22350A30-US Integrator Manual page 101

Open
3. AdvReaderConfig.xml
Copy AdvReaderConfig.xml
Figure E-10
Change to , and set
4. DHCP 0
Save the edited file locally.
5.
Copy and replace the edited
6.
Reset the reader twice as follows:
7.
Insert a paper clip into the reset hole for less than two seconds, or repower the unit. The Boot LED turns
a.
red, then remains amber during initialization. When the reader has initialized, the LED turns green.
After the reader initializes and the LED turns green, reset the reader again as in Step a. When the Boot
b.
LED is green, reader is ready and accessible using the configured IP.
in any text editor.
, , and optionally
IPAddr Mask
AdvReaderConfig.xml file
Static IP Configuration
and IP addresses to desired values.
Gateway DNS
in the directory.
\ReaderConfig
E - 7