Gateway: Restart - Siemens S7 Series Communication Instruction Manual

4 Configuration and Project Engineering
4.6

Gateway: Restart

Note For changes of the configuration files to be activated, restart the gateway.
If changes are made in the "pnet1.cfg" PROFINET driver file, a complete restart
(de-energized) of the gateway is required.
Table 4-10: Restarting the gateway
No.
Click the "Restart required!" button.
1.
Alternative:
To restart the gateway, navigate to the
"General > Restart > Restart" menu item.
2. The gateway automatically checks the
configuration files and, in the "Configuration
check" tab, displays errors and warnings and
the specific file and line where the cause can
be found.
Check the appropriate files/lines.
If the current configuration in the gateway is
correct, click "Next".
Go to the "Restart Gateway" tab.
3.
Optionally, you can check the "complete
system restart" check box to perform a
complete system restart.
Click the "Restart" button to confirm the action
and follow the menu prompts.
4. After the restart, the changes made are
activated.
Note
After a complete system restart, you have to
log back on to the gateway.
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
Action
06/2017
Comment
Alternative:
-
26