Add The Multi-Care Filter; Activate The Multi-Care Filter - Philips AC4084 User Manual

8 Add the Multi-
care filter
Note
•
This is applicable only for AC4084.
AC4084 comes with the pre-filter, activated
carbon filter and the HEPA filter. For this
appliance, only the filter light
filter light (activated carbon filter and
HEPA filter) are activated.
To enjoy the benefits of the Multi-care
filter, you can purchase this filter separately.
In combination with the HEPA filter, the
multi-care filter filters out dust, pollen and
ultra-fine particles.
Activate the Multi-care filter
After you have installed the Multi-care filter,
you can activate it as follows:
Note
•
For information of how to install the Multi-care filter,
see the chapter 'Replace the filters', section 'Replace
the Multi-care filter'.
1
Switch off the appliance.
2
Press the RESET button once.
EN
30
/ and the
3
•
» The filter lights /
on. The filter light is off.
Press and hold the RESET button for two
seconds.
» The Multi-care filter lifetime is
activated. The filter light
Note
To deactivate the multi-care lifetime, press and hold
the RESET button again for two seconds. Then the
filter light is off.
, and are
is on.