Whisper Page - NEC Univerge SV9300 Series User Manual

WHISPER PAGE

This feature allows a secretary to interrupt the boss
in a private way. By pressing a feature key or
dialing an access code, the secretary terminal can
interrupt the conversation between the boss and
another party. When the conversation is
interrupted, the boss can hear the secretary but the
other party is unaware of the voice override.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET
Whisper Page has two kinds of operations.
PATTERN 1
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial desired extension number.
You will receive a busy tone.
BUSY
4:26 PM MON 11 MAY 2015
CB CW
3. Press Transfer key.
4:26 PM MON 11 MAY 2015
CB CW
4. Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a service set tone.
4:26 PM MON 11 MAY 2015
Recall VOICE
201
>>>>
>>>>
201
CB >>>>
5. Listen to conversation and speak to
boss terminal only.
CALL WAITING
4:26 PM MON 11 MAY 2015
MIC
PATTERN 2
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a feature dial tone.
4:26 PM MON 11 MAY 2015
CB
3. Dial desired extension number.
You will receive a service set tone.
4:26 PM MON 11 MAY 2015
Recall
4. Listen to conversation and speak to
called terminal only.
CALL WAITING
4:26 PM MON 11 MAY 2015
MIC
TO ANSWER
1. Press Answer key.
Call in progress is placed on hold.
A hold tone is not transmitted to the other
party of the original call.
Calling terminal and called terminal can
privately speak.
Answer key lamp lights red. →
CW
4:26 PM MON 11 MAY 2015
MIC
87
FEATURE OPERATION
201
CONF Recall
CW >>>>
201
VOICE CB >>>>
201
CONF Recall
201
Mute