GE IM-5D Owner's Manual & Installation Instructions page 7

INSTALLING THE ICEMAKER (Continued)
INSTALL ICEMAKER WATER
5
LINE ASSEMBLY
From the front of the unit, push the water line
through the hole in the top of the freezer.
shape" lines up.
Tuck the connector into the pocket.
back side of the access hole.
the front end up and snap into place.
From the back of the refrigerator, find the
water line you just installed. Weave the line
through the small hole in the plug and push
sure the plug is pushed in completely.
Plug
49-60807 Rev. 3
Installation Instructions
Terminals
Plug
INSTALL NEW WATER VALVE
6
the bottom panel by pulling up and out.
Turn the water off at the shutoff valve.
Pull out the valve and disconnect the terminal.
J-shaped tube out of the water valve. Dispose
of valve and snap ring.
J-shaped
Water Tube
Terminal
7