Product Description; Specifications - Bosch LTC 8782 Series Instructions For Use Manual

The LTC 8782/XX-01 is a Bosch to Vicon code translator designed to permit control of Vicon VPS
system receivers from Bosch Allegiant controllers. It receives Bosch biphase code and transmits
the appropriate commands in Vicon RS-422 format. There are four independent Vicon outputs.
The translator is contained in a standard 19" electronic housing (one rack unit high). Input and
output connections are made with removable screw terminals. Front panel LEDs indicate status of
power, receive, and transmit.
Internal configuration switches are used to set the operation of the code translator.
Bosch camera addresses are converted to one of sixteen Vicon address groups of 256.
The Vicon RS-422 output can be either 9600 baud or 4800 baud.
SIZE:
WEIGHT:
POWER:
INDICATORS:
BIPHASE INPUT:
VICON OUTPUTS:
To install the case on the rack mount frame, remove the front panel and the plastic bezel. The
rack mount frame takes the place of the bezel as shown below.

PRODUCT DESCRIPTION

SPECIFICATIONS

19"W x 1.75H x 5.45D
1.5 lb
9Volt to 15Volt AC or DC at .75 Watts
Front panel LEDs: Power, Rx, & Tx
(1) 3-pin Screw terminal plug
(4) 3-pin screw terminal plugs
2