Guidelines And Declarations; Certificates And Approvals - Siemens SIMATIC ITP1000 Manual

SIMATIC
Industrial Tablet PC
CE marking
Product Information

Guidelines and declarations

Notes on the CE mark
The following applies for this SIMATIC product:
RTTE directive
This product is designed for the following applications:
Application
Industrial applications
The devices are compliant with EN 61000-3-2 (Transient
currents) and EN 61000-3-3 (Voltage fluctuation and Flicker).
This product meets the requirements of EC directive
1999/5/EC "Radio Equipment and Telecommunications
Terminal Equipment - Use of the Radio Spectrum":
EN 300 328 / EN 301 893 / EN 301 489-17 / EN 301 489-1 /
EN300330-2
The directive contains the requirements of the Directive of the
Council on the Approximation of the Laws of Member States
relating to Electromagnetic Compatibility (EMC Directive).
Safety: see Low voltage directive
Low voltage directive
This product fulfills the Directive 2014/35/EU of the European
Parliament and of the Council on the harmonization of the
laws of Member States relating to electrical equipment
designed for use within certain voltage limits.
Compliance with this directive has been tested to
EN 60950-1.
Siemens AG
Division Digital Factory
Postfach 48 48
90026 NÜRNBERG
GERMANY
2
Requirement for
EN 61000-6-4 EN 61000-6-2
Declaration of conformity
The EC declaration of conformity and the corresponding
documentation are made available to authorities in
accordance with the EC directives stated above. Your sales
representative can provide these on request.
Installation guidelines
The installation guidelines and safety notices specified in the
supplied documentation must be adhered to during
commissioning and operation.
Connecting peripherals
Noise immunity requirements to EN 61000-6-2 are met if
connected peripherals are suitable for industrial applications.
Peripheral devices must only be connected using shielded
cables.

Certificates and approvals

ISO 9001 certificate
The Siemens quality assurance system for all product
creation processes (development, production and sales)
meets ISO 9001 requirements.
This has been certified by DQS (the German society for the
certification of quality management systems).
Software License Agreement
If devices are supplied with preinstalled software, you must
observe the corresponding license agreements.
Certificates for USA and Canada
Product safety.
The following approval is available for the device:
Underwriters Laboratories (UL) according to UL 60950-
1 Second Edition and Canadian Standard CAN/CSA-
C22.2 No. 60950-1-07 Second Edition.
WLAN
The integrated wireless LAN conforming to IEEE 802.11
a/b/g/n/ac is certified for Europe.
CE Marking
A5E39886951-AA, 01/2017