GE eBike with Control Terminal PC Operator's Manual page 48

NIBP
a
b
Figure 2-6 Blood-pressure cuff connections
a Microphone jack
b Socket for cuff tubing
Caution
Equipment Damage — Avoid strong vibrations of
the ergometer during transport.
12
Setup and Mains Connection
eBike
eBike with Control Terminal PC
Connecting the Blood-Pressure Cuff
Connect the microphone to a (Figure 2-6).
Connect the cuff tubing to the connection sleeve b. It
must properly lock into place. To disconnect the
tubing, push the knurled sleeve backward.
Transport
Disconnect all connected cables.
Stand in front of the ergometer and grasp both handles
of the handlebar.
Tip the ergometer forward until it rests only on the
castors.
Wait until you have achieved an equilibrium before
moving the ergometer.
When you have reached the new location, lower the
ergometer very carefully. Otherwise, severe damage
may occur.
2018112-001 Revision B