Samsung OfficeServ 7400 Technical Manual page 149

OfficeServ 7400
TECHNICAL MANUAL
Default Port sets the IP connection ports to use for this site. The default is 5090 for
programming and 5003 for Media Card access. To set new values you must uncheck the
Default Port checkbox.
To create a new Modem site connection you must enter several pieces of information:
 Site Name sets the name for the connection, which is used mainly for your
reference.
 Link Type (top of screen) should be set to MODEM.
 COM Port determines the port on your PC that the MODEM is connected to.
This can be obtained in Windows XP by clicking [Start]  [Settings] 
[Control Panel]  [Printers and Other Hardware] and double-clicking
"Phone and Modem Options". Once loaded click the Modems tab and the
COM port is listed under the column Attached To.
 Baudrate determines the connection speed. This setting defaults to 38400.

Destination is the phone number to dial after accessing the MODEM to
connect to the system.
Figure 7.44 Site List
7.45
Home Page Home Page Table of Contents Table of Contents
INSTALLATION
PART 7 JANUARY 2011