Siemens Sinamics S120 Getting Started page 39

4. Click on "Continue >".
In step 2, the project wizard opens the "Set PG/PC interface" window.
Image 5-6
5. In this window, you can check the settings of the communication interface made in the
previous chapter, i.e. you do not have to change anything in this window. Click on
"Continue >".
The project wizard searches for drive units in step 3. The drive units found are displayed
in "Preview".
Image 5-7
STARTER Getting Started
Getting Started, (GS1) 07/2016, 6SL3097-4AG00-0BP4
Setting the PG/PC Interface
Insert drive units
Creating a drive object
5.3 Creating a drive project
39