Digital Audio (Optical) Connection
Before connecting any external device or cable to the TV, first verify the TV's model number. A sticker
showing the model number is attached to the back of the TV. The connection method varies depending
on the model.
Connecting an AV receiver to the TV via a digital audio (optical) connector lets you listen to digital
audio.
Connecting a device using an optical cable does not automatically turn off the TV speakers. To turn
off the TV's speakers, set
other than TV Speaker.
Adjust the audio device's volume using its remote control.
"
An unusual noise coming from the audio device while you are using it may indicate a problem with the
audio device itself. If this occurs, ask for assistance from the audio device manufacturer.
"
Digital audio is only available with 5.1-channel broadcasts.
"
Only use headphones with a 3-conductor TRS type jack.
"
The headphone volume and the TV volume are adjusted independently of each other.
"
While the headphone is connected, the TV speakers are muted and certain
Refer to the diagram and connect the optical cable to the TV's DIGITAL AUDIO OUT(OPTICAL)
connector and the device's DIGITAL AUDIO IN(OPTICAL) connector.
Speaker Select (Sound
Speaker Settings
Speaker
Select) to something
Sound
options are deactivated.