1.3 Assembly with Screws
1.
2.
1.4 Dimensions
2019/02/27
NOTICE!
Damage to the modules without using wall mounting accessory!
Wall mounting accessories (TA526) prevent bending and damaging the
modules during assembly with screws.
Inserting the wall mounting accessories TA526 is mandatory.
TA526 are snapped on the rear side of the module like DIN rails. One TA526 is turned by
180°.
Fasten module with screws (M4, max 1.2 Nm) from the front side.
The dimensions are in mm and in brackets in inch.
3ADR024117M02xx, 11, en_US
TB51x-TB54x
Dimensions
11