Example For Monitoring And Managing The Firewall Module From The Network Device - HP A-F1000-E Getting Started Manual

To do...
Enter system view
Enter interface view
Enable the ACSEI client
Displaying and maintaining ACSEI server and client
To do...
On the
Display ACSEI client summary
network
Display ACSEI client information
device
On the
Display ACSEI client information
firewall
Display current ACSEI client state
module
Example for monitoring and managing the firewall
module from the network device
Network requirements
A firewall module is installed in slot 3 of the network device to detect the traffic passing the network
device. The internal interface Ten-GigabitEthernet 3/0/1 on the network device is connected to the
internal interface Ten-GigabitEthernet0/0 on the firewall module.
The network device redirects received traffic to the firewall module. The firewall module processes the
traffic based on the configured security policy, and redirects permitted traffic to the network device for
forwarding.
Configure the network device and firewall module so that you can log in to and restart the firewall
module from the network device. Configure the clock synchronization timer as 10 minutes, and configure
the monitoring timer as 10 seconds.
Use the command...
system-view
interface interface-type
interface-number
acsei-client enable
Use the command...
display acsei client summary [ client-id ]
display acsei client info [ client-id ]
display acsei-client information
display acsei-client status
76
Remarks
—
Required
Disabled by default.
NOTE:
The Comware platform can run only one ACSEI
client, that is, the ACSEI client can be enabled on
only one interface at a time. But the ACSEI client on
the Comware platform and that on the firewall
module can run simultaneously.
Remarks
Available in any
view