Sony BKDM-7041 User Manual page 6

Digital Sketch Effects
4
4
Adjust the "Width" parameters.
• Left knob ("H"): width of left and right beveled edges (0 to
100%)
• Center knob ("V"): width of top and bottom beveled edges
(0 to 100%)
• Right knob ("All"): width of all beveled edges (***)
(The "All" setting is reflected in the separate horizontal
and vertical settings.)
Making the boundaries of the edges soft – F6 (SOFT)
Use the following procedure.
1
Press F6 (SOFT), turning it on.
2
Adjust the "Softness" parameters.
• Left knob ("Innr"): degree of softness of the inside of the
edges (0 to 100%)
• Center knob ("Bund"): degree of softness of the boundary
between two edges (0 to 100%)
Selecting the border color or edge intensity – F8 (EDGE
SOURCE)
Use the following procedure.
1
Press F8 (EDGE SOURCE).
The EDGE SOURCE menu appears.
EDGE FLAT HUE
MODE COLOR ROT
EDGE SOURCE menu soft key indications (in "MATTE" mode)
2
Press F1 (EDGE MODE), to select "MATTE" or "LIGHT".
3
When you selected "MATTE", for a single hue press F2
(FLAT COLOR), or for a progressively changing hue press F3
(HUE ROT), turning it on.