Table of Contents
Advertisement
Chapter 5: Web-Based Management
This page includes the following fields:
Object
System event selection:
Port event selection:
58
Description
There are 4 event types—Device Cold Start, Device Warm Start,
Authentication Failure, and X-ring Topology Change. The
checkboxes are not available for ticking unless the Syslog Client
Mode on the Syslog Configuration tab and the E-mail Alert on the
SMTP Configuration tab are enabled first.
Device cold start: When the device executes cold start action, the
system will issue the event log/email alert to the system log/SMTP
server respectively.
Device warm start: When the device executes warm start, the
system will issue the event log/email alert to the system log/SMTP
server respectively.
Authentication Failure: When the SNMP authentication fails, the
system will issue the event log/email alert to the system log/SMTP
server respectively.
X-ring topology change: When the X-ring topology has changed, the
system will issue the event log/email alert to the system log/SMTP
server respectively.
Also, before the drop-down menu items are available, the Syslog
Client Mode selection item on the Syslog Configuration tab and the
E-mail Alert selection item on the SMTP Configuration tab must be
enabled first. Those drop-down menu items have 3 selections—Link
UP, Link Down, and Link UP & Link Down. Disable means no event
will be sent to the system log/SMTP server.
Link UP: The system will only issue a log message when the link-up
event of the port occurs.
Link Down: The system will only issue a log message when the link-
down event of port occurs.
Link UP & Link Down: The system will issue a log message at the
time when port connection is link-up and link-down.
GE-DSH-73/DSH-82 and DSH-82-PoE User Manual
Advertisement
Table of Contents
