Installing To Century Jj (Strong International) - Sony DFP-R3000 Installation Manual

5-2-3. Installing to CENTURY JJ (Strong International)

Required Parts
Part Name
Adapter (A)
Hexagon cap screw (3/8-16)
Wave washer
Hexagon cap screw (M4 x 12)
Spring washer (SW4 TYPE2)
Washer (W4, MID)
Procedure
Step 1. Installing the Adapter (A) to the Projector
1. Remove REEL ARM or platter guide roller of supply
reel side of the projector.
2. Attach the adapter (A) tentatively to the projector
using the two hexagon cap screws (3/8-16) 1 and
wave washers.
n
Fixing hole of adapter (A) varies depending on the
projector to be used. (See the figure below.)
3. Attach the path adjustment tool tentatively to the
adapter (A) with the two hexagon cap screws (M4 x
12) 2, two washers (W4) and two spring washers
(SW4) as shown in the figure.
DFP-R3000
Q'ty Sony Part No.
1 —
2 —
2 —
4 —
4 —
4 —
1
Hexagon cap screw (3/8-16)
Wave washer
2 Hexagon cap screw
Remark
Supplied with DFP-R3000
Supplied with DFP-R3000
For attaching adapter (A)
Supplied with DFP-R3000
For attaching adapter (A)
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-3000
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-R3000
Supplied with DFP-R3000
For attaching Path adjustment tool and DFP-R3000
Path adjustment tool
1
Washer (W4)
Spring washer
(SW4)
(M4 x 12)
2 Hexagon cap screw
(M4 x 12)
Spring washer (SW4)
Washer (W4)
Adapter (A)
Projector
CENTURY JJ
1-15 (E)