Ordering replacement parts
Click the name of the array. The Array Properties window and Explorer tree
are displayed.
1. In the Explorer tree, click Alerts & Events. The Alerts & Events window
is displayed. This window lists the failed components in the array.
2. Select the parts that have failed, and click Show Details at the lower
right corner of the window. The Failed Parts dialog box is displayed.
3. Check the details of the failed part. Click the support portal web site link
after checking the failed part details.
NOTE: If the management host that has Navigator 2 installed is not
connected to the Internet, note the order information, as shown in
Figure
parts.
Figure 2-5: Alerts & Events Window
2-6, and then use a system that is connected to the Internet to order
Identifying failed parts
Hitachi AMS 2000 Family Storage System Service Guide
2–5