Advertisement
Instruction Sheet for Headset Adapter Cable NKN6498
Disassemble the adapter cable using two shop rags and two gas-
type pliers. Attach the headset plug onto the adapter bayonet-type
socket so as to stabilize the adapter and protect the bayonet-type
connector from being deformed. Use a shop rag around the headset
plug and another shop rag around the housing (item no. 3) to pro-
tect the cable adapter components from the pliers jaws marks. Grasp
the headset plug with one plier and the housing with the other plier.
Unscrew the socket assembly (item nos. 7 and 8) from the housing
(item no. 3). The pc board assembly (item no. 6) is now accessible.
Reassemble the adapter cable in the reverse order of disassembly. Make
sure that the pc board is seated into its mating groove in the adapter collar
(item no. 7) to ensure that the wires do not get twisted-up during reassembly.
And, make sure that the adapter cable is attached to the headset plug to pro-
tect the bayonet-type connector from being deformed.
Replacement Parts
8
7
5
Figure 3: Adapter Cable Exploded View
6
4
3
2
1
3
Exploded View Parts List
Item
Motorola
No.
Part No.
1
3005741Z01
2
4205370R03
3
1505376U01
4
0505432U01
5
4210217A02
6
0105955T60
7
4305368U01
8
2805366U01 CONNECTOR
To order replacement parts, or for war-
ranty information, contact Motorola
Americas Parts Division (APD) at
1-800-422-4210 or 1-847-538-8023.
Description
ADAPTER
STRAIN
RELIEF
HOUSING
EYELET
TIE WRAP
PC BOARD
ASSY.
COLLAR
Advertisement
