Husqvarna Automower 105 Operator's Manual page 23

of the product. If the incorrect PIN-code is
entered 5 times, the product is locked for
some time. The lock is extended for each
new incorrect try.
• Time lock - The product is locked if the PIN-
code has not been entered in 30 days. Enter
the PIN-code to get access to the product.
3.9.4.1 To change the PIN code
To get access to the menu
1. Do steps 1–3 in
on page 20 .
2. Use the multi-choice buttons to move
through the menu structure
Change PIN code .
3. Enter the new PIN code.
OK .
4. Push
5. Enter the new PIN code.
OK .
6. Push
7. Make a note of the new PIN code. Refer to
Introduction on page 3 .
3.9.4.2 To set the security level
Select 1 of 3 security levels for your product.
To get access to the menu
1. Do steps 1–3 in
on page 20 .
2. Use the multi-choice buttons to move
through the menu structure
Security level .
3. Use the multi-choice buttons to select the
level of security.
OK .
4. Push
3.9.4.3 To create a New loop signal
The loop signal is randomly selected to create a
unique link between the product and the charging
station. In rare cases, there may be a need to
generate a new signal, for instance if two
adjacent installations have a very similar signal.
1. Place the product in the charging station.
To get access to the menu
2. Do steps 1–3 in
on page 20 .
3. Use the multi-choice buttons to move
through the menu structure
loop signal .
OK and await confirmation that the
4. Push
loop signal has been generated. This
normally takes about 10 seconds.
1285 - 002 - 20.08.2019
3.9.5 Settings
In settings you can change the general settings
to your product.
3.9.5.1 ECO mode
ECO mode stops the signal in the boundary loop,
the guide wire and the charging station, when the
product is parked or is charging.
Security >
Note: Use
interference with other equipment, for example
hearing loops or garage doors.
Note: Push the STOP button before you remove
the product from the charging station. If not, the
product can not be started in the work area.
To set the ECO mode
1.
2.
Security >
3.
3.9.5.2 To set the Time & Date
1.
2.
3.
4.
5.
6.
Security > New
3.9.5.3 To set the language
1.
ECO mode to save energy and avoid
Do steps 1–3 in To get access to the menu
on page 20 .
Use the multi-choice buttons to move
through the menu structure
mode .
OK .
Push
To get access to the menu
Do steps 1–3 in
on page 20 .
Use the multi-choice buttons to move
through the menu structure
& Date .
Use the number buttons to set the time and
OK .
then push
Use the number buttons to set the date and
OK .
then push
Use the multi-choice buttons to set the time
OK .
format and then push
Use the multi-choice buttons to set the date
format and then push OK .
To get access to the menu
Do steps 1–3 in
on page 20 .
Settings > ECO
Settings > Time
Installation - 23