LG Pra.L BBL1 Owner's Manual page 39

Galvanic ion booster
Hide thumbs Also See for Pra.L BBL1:
Table of Contents

Advertisement

Precautions for use
39
POWER: This unit operates on a mains supply of
100 - 240 V ~ 50 / 60 Hz .
Wiring: This unit is supplied with a BS 1363 approved main plug .
When replacing the fuse, always use a fuse of the same rating
and approved to BS 1362 . Never use this plug with the fuse cover
omitted . To obtain a replacement fuse cover contact your dealer . If
the type of plug supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable type fitted.
Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit
must be destroyed . A mains plug with bared wires is hazardous if
inserted in a mains socket . Do not connect either wire to the earth
pin, marked with the letter E or with the earth symbol 6 or coloured
green or green and yellow. If any other plug is fitted, use same rating
of fuse in the plug .
Important: The wires in this mains lead are coloured in accordance
with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in
the mains lead of this unit may not correspond with the coloured
marking identifying the terminals in your plug, proceed as follows:
The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black . The wire which is
coloured brown must be connected to the terminal which is marked
with the letter L or coloured red .
BL1.ASGPLLK_FULL_ENG_MFL71182271.indd 39
2019-06-11
2:02:35

Advertisement

Table of Contents
loading

Table of Contents