Siemens SINUMERIK 840Di sl Function Manual page 173

12/2008
Field
Number of lines
Comment
Restriction:
For reasons of data protection, the option of editing maintenance jobs described
above is only available for maintenance jobs that have not yet been opened or
acknowledged. Open maintenance jobs are protected against changes being made
to their contents during the maintenance process. Acknowledged maintenance jobs
are, therefore, saved in document format, containing the maintenance procedures
carried out.
Options
Submenus are available as an option if axis tests are connected to the
maintenance job.
The axis tests (axis test type and name) which have been connected to the
maintenance job while the maintenance schedule was being created are displayed.
The details indicate:
•
That an axis test has been performed, as well as whether this was
successfully completed and interpretable results produced
•
The date on which the axis test was performed. A date is not entered if the
maintenance job has been acknowledged without an axis test having been
performed.
•
The (consecutive) number of each axis test counted (axis test type and name)
A date is not entered if the maintenance job has been acknowledged without
an axis test having been performed.
•
The axis, along with its name (but not the axis index or channel axis index),
and the parameters of the axis test in NC syntax format
Another optional view is available for combinations of axis tests (several axis tests
compiled in a test procedure):
•
Here, the number of axis tests is displayed, as well as whether the axis tests
yielded interpretable results.
•
The date on which the axis tests were performed. If the maintenance job has
been acknowledged without the axis tests being performed, a date is not
entered.
•
The NC channel in which the axes are configured for the axis test
•
The number of axis tests configured in this combination
© Siemens AG 2008 All Rights Reserved
ePS Network Services, Function Manual (FH) - Release 12/2008
Content
The number in the display indicates the
number of lines per screen that are shown
in this menu. You can select from 4 to 20
lines. A scroll bar will then be displayed
on the screen.
Description of the maintenance
procedures to be performed. This field
displays the maintenance report of the
person performing maintenance.
4 Organizational tasks
4.1 Maintenance
Type
DISPLAY
SELECTION
DISPLAY
EDIT
(Max. 1000
characters;
including blanks)
4-173