Philips IRT 9090 User Manual
  1. Manuals
  2. Brands
  3. Philips Manuals
  4. Remote Control
  5. IRT 9090
  6. User manual

Philips IRT 9090 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

© 2015 Koninklijke Philips N.V. All rights reserved. Philips reserves the
right to make changes in specifications and/or to discontinue any product
at any time without notice or obligation and will not be liable for any
consequences resulting from the use of this publication.
08/15
philips.com/luminaires
Philips Lighting
North America Corporation
200 Franklin Square Drive
Somerset, NJ 08873
Tel. 855-486-2216
Philips Lighting Canada Ltd.
281 Hillmount Rd,
Markham, ON,
Canada L6C 2S3
Tel. 800-668-9008

Advertisement

Table of Contents
loading

Related Manuals for Philips IRT 9090

Summary of Contents for Philips IRT 9090

  • Page 1 © 2015 Koninklijke Philips N.V. All rights reserved. Philips reserves the Philips Lighting Philips Lighting Canada Ltd. right to make changes in specifications and/or to discontinue any product North America Corporation 281 Hillmount Rd, at any time without notice or obligation and will not be liable for any...

  • Page 2: Table Of Contents

    Contents SpaceWise Technology Industry Luminaire ..................2 SpaceWise Technology Luminaire sensor coverage area ............. 3 Layout ..............................4 SpaceWise Remote (IRT 9090) ......................5 Grouping ............................... 7 Application Modes ..........................9 Application Mode Selection ........................ 10 Maximum light output selection ......................12 Creating zones in a group ........................

  • Page 3: Spacewise Technology Industry Luminaire

    1.6 1. SpaceWise Technology Industry Luminaire Philips luminaires with wireless SpaceWise Technology are stand-alone LED lighting systems with integrated high bay occupancy sensing and daylight harvesting, designed specifically to meet the lighting control needs of an industrial space. With this technology, installers can group multiple luminaires and activate automated dimming behaviors using a SpaceWise remote control.

  • Page 4: Spacewise Technology Luminaire Sensor Coverage Area

    The cover is a plastic circular ring sticker that can be peeled and applied on the lens of the sensor. In any instance the view of the sensor should not be blocked with any obstructions. Philips Lighting North America...

  • Page 5: Layout

    Also check that the first luminaire is in the right position and oriented correctly with respect to the edge of the isle. Refer to section 12 (walk test) for details on testing the coverage area of the sensor. Note the luminaire needs to be grouped before performing the walk test. Philips Lighting North America...

  • Page 6: Spacewise Remote (Irt 9090)

    Install luminaires per manufacturer installation instructions and ensure sensors from adjacent luminaires are not positioned next to one another. 3. SpaceWise Remote (IRT 9090) The SpaceWise remote is the only tool required by the installer to group the SpaceWise Technology Luminaires together and to change any default configuration settings. A set of 2 AAA batteries of 1.5V each are supplied with the remote.
  • Page 7 SpaceWise for Industrial Applications v. 1.6 Philips Lighting North America...

  • Page 8: Grouping

    “add.” Repeat step for adding all the luminaires in the group. Point to any of the luminaires added in All the luminaires in the group the group and press “close.” will go to 50% light level. Philips Lighting North America...
  • Page 9 Refer to the FAQ section for additional information on how to correct non responsive luminaires. Philips Lighting North America...

  • Page 10: Application Modes

    (mode# 6) and since the behavior varies for each mode, it is recommended to select the mode that closely reflects the installed application space. See the SpaceWise Design Guide (www.philips.com/spacewise) for details. Application...

  • Page 11: Application Mode Selection

    “mode.” blinking. While the LED is still blinking red, enter Red LED on remote will stop the number for the preferred mode (see blinking. list at step 5). Eg. Select “8” for warehouse comfort application mode. Philips Lighting North America...
  • Page 12 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice. Wait for LED to stop blinking (apx. 10 Group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 13: Maximum Light Output Selection

    Red LED on remote will stop Wait for LED to stop blinking (apx. 10 blinking. seconds). The luminaire will FLASH twice Point remote to any of the luminaires and group light level will go to and press “send.” 50%. Philips Lighting North America...
  • Page 14 50% light level to permanent 77% light level. If you repeat the step down sequence again then upon careful observation you will see the subtle change in light level from 77% to 66%. Philips Lighting North America...
  • Page 15 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice Wait for LED to stop blinking (apx. 10 and group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 16: Creating Zones In A Group

    4. Point remote to any luminaire and press Red LED on remote will start “unlock,” once. blinking. Red LED on remote will stop Wait for LED to stop blinking (apx. 10 blinking. seconds). Philips Lighting North America...
  • Page 17 To stop the zone creation process, point All the luminaires in the group to any of the luminaires added in the will go to 50%. zone and press “close.” Philips Lighting North America...
  • Page 18 “zone”. Point to the same luminaire and press The entire zone turns on or off “on” or “off.” accordingly. To stop the test process, point to the same luminaire and press “close.” Philips Lighting North America...

  • Page 19: Activate / Deactivate Occupancy Sensor

    Red LED on remote will start blinking. While the LED is still blinking red, enter Red LED on remote will stop the numbers: blinking. “10”: Enable occupancy sensing “12”: Disable occupancy sensing (lights will stay at 100%) Philips Lighting North America...
  • Page 20 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice. Wait for LED to stop blinking (apx. 10 Group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 21: Activate / Deactivate Daylight Sensor

    50%. Press “daylight” button. Red LED on remote will start blinking. While the LED is still blinking red, enter Red LED on remote will stop the numbers: blinking. “1”: Disable daylight sensing “2”: Enable daylight sensing Philips Lighting North America...
  • Page 22 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice. Wait for LED to stop blinking (apx. 10 Group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 23: Daylight Calibration

    When the arrow keys are and adjust the group light level to the pressed, red LED on remote will required level using the dimming “up” or keep blinking. “down” arrow keys The group will dim up or down accordingly. Philips Lighting North America...
  • Page 24 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice. Wait for LED to stop blinking (apx. 10 Group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 25: Test Occupancy Coverage Area (Walk Test)

    Point remote to any of the luminaires Test feature is activated; users and press “test.” can now walk in the space to estimate the occupancy coverage area. To stop the test feature, press the “test” button again. Philips Lighting North America...

  • Page 26: Path Of Egress Mode For Emergency Applications

    27% will be delivered. SpaceWise luminaires can also be ordered with a Philips emergency driver option. If this configuration is purchased then luminaires don’t have to be configured as “path of egress”...
  • Page 27 Red LED on remote will start blinking. While the LED is still blinking red, enter Red LED on remote will stop the numbers: blinking. “11”: Enable path of egress feature “10”: Disable path of egress feature Philips Lighting North America...
  • Page 28 Point to any of the luminaires in the Red LED on remote will start group and press “lock.” blinking. The luminaire will FLASH twice. Wait for LED to stop blinking (apx. 10 Group is ready for normal seconds) then press “send.” operation. Philips Lighting North America...

  • Page 29: Troubleshooting

    Once LED stops blinking, with remote Luminaire will turn OFF and then still pointing to the luminaire in the turn back ON to indicate reset. group, press “send.” Repeat step “b” for all the luminaires that need to be reset. Philips Lighting North America...

  • Page 30: Faqs

    D. Do my luminaires forget their settings after power is lost or interrupted? No, all settings are retained as long as the luminaires have not been factory reset or there has been a hardware failure. Philips Lighting North America...

  • Page 31: Fcc Compliance Statement

     This luminaire must accept any interference received, including interference that may cause undesired operation Any changes or modification not expressly approved by Philips could void the user’s authority to operate this equipment. This product is intended for commercial use only.
  • Page 32 © 2015 Koninklijke Philips N.V. All rights reserved. Philips reserves the Philips Lighting Philips Lighting Canada Ltd. right to make changes in specifications and/or to discontinue any product North America Corporation 281 Hillmount Rd, at any time without notice or obligation and will not be liable for any...

This manual is also suitable for:

Irt 9090/01

Table of Contents